Our goal at Nunn Design is to make your jewelry making experience fun! We believe that providing high quality products, easy instructions and all the supplies you need to create with are an essential part of that jewelry making experience.This week we are featuring 3 retail kits that support us all in this goal.
Included in the featured kit: Organic Hoop with Crystal Charm Earring Kits are; brass jumprings, brass earwires, lead-free cast organic hoops, lead-free cast organic bezels and Preciosa Crystals. All the kit findings are plated with 24k gold plate or a .999 fine silver plate.
Available and sold separately are tools and glue.
(2) Hoop Organic Large
(2) Open Back Bezel Circle 8mm
(2) Preciosa Crystal 8mm Circle
(4) 6mm Textured Circle Jumprings
(2) 9mm Textured Circle Jumprings
2 Pair Needle Nose Pliers
Watch Quick 1 Minute Tutorial Video!
Making of the Crystal Charms
The Nunn Design Findings are oxidized to provide an aged look to the precious metal plating. Clean the bezels thoroughly prior to applying glue. Dip the tip of a Q-Tip into rubbing alcohol and clean away any of the blackened oxidization from the bezels.
Squeeze a small amount of glue onto a piece of plastic. Dip a toothpick into the glue and smear the glue around the inside edges of the bezel. Insert a crystal chaton. If there is any excess glue that has squished out the sides, clean it up with a toothpick and rubbing alcohol.
Repeat for the second Crystal Charm.
Assembling the Earrings
Next, attach the Crystal Charm to the Organic Hoop with a 6mm Jumpring. Using two pair of needle nose pliers, hold one of the 6mm Textured Circle Jumprings at 3 o’clock and 9 o’clock. Pull one of the sets of pliers with one hand forward and the other set of pliers back to open the jumpring. Insert onto the jump ring the Crystal Charm and an Organic Hoop. Hold the jumpring again at 3 o’clock and 9 o’clock. Pull one of the sets of pliers with one hand forward and the other set of pliers back to close the jumpring. Repeat for the other earring.
Now, attach the Organic Hoop to the 9mm Textured jumpring. To attach the 9mm Textured Circle Jumpring to the Organic Hoop, open it using two pair of needle nose pliers. Hold one pair of pliers at 3 o’clock and the other at 9 o’clock. Pull one of the sets of pliers with one hand forward and the other set of pliers back to open the jumpring. Attach onto the jumpring the Organic Hoop. Hold the jumpring again at 3 o’clock and 9 o’clock with the pliers. Pull one of the sets of pliers with one hand forward and the other set of pliers back to close the jumpring.
Attach the 6mm Textured Jumpring onto the 9mm Jumpring. Repeat Steps 4 & 5 for the other earring.
Slightly bend back the balled section of the earwire. Attach the 6mm Textured Circle Jumpring. Bend back into place the balled section of the earwire.
Repeat to make the pair.
Watch the Video!
Watch the video to see how easy this kit is to create!
Print a copy of the instructions to follow along!
Shop Supplies WHOLESALE:
If you enjoyed reading this post,
please subscribe to our blog.
Here are 10 Reasons Why to Subscribe
and a place to do so!
How to Purchase Wholesale?
If you are interested in becoming one of the many designers who trust their jewelry to Nunn Design Findings, please join us by registering to become one of our wholesale customers!
Please visit our Where to Buy Page for a listing of online stores that sell Nunn Design Findings retail.
If you enjoyed reading this post, please subscribe to our blog. Here are 10 Reasons Why to Subscribe and a place to do so!