Our goal at Nunn Design is to make your jewelry making experience fun! We believe that providing high quality products, easy instructions and all the supplies you need to create are an essential part of that jewelry making experience. This week we are featuring 3 retail kits that support us all in this goal.
Included in the Organic Tag with Crystal Charm Bracelet Kit is, a heavy weight brass charm bracelet, brass jumprings, lead-free cast toggle & ring, a cast lead-free Organic Tag, a lead-free cast Open Back Bezel and a Preciosa Crystal. All the kit findings are plated with 24k gold plate or a .999 fine silver plate.
Tools and glue are available and sold separately.
(1) Charm Bracelet
(1) Organic Tag Circle Large Single Hole
(1) Open Back Bezel Circle 8mm
(1) Preciosa Crystal 8mm Circle
(1) 6mm Textured Circle Jumprings
(1) 9mm Textured Circle Jumprings
2 Pair Needle Nose Pliers
Watch Quick 1 Minute Tutorial Video!
Making of the Crystal Charms
The Nunn Design Findings are oxidized to provide an aged look to the precious metal plating. Clean the bezels thoroughly prior to applying the glue. Dip the tip of a Q-Tip into rubbing alcohol and clean away any of the blackened oxidization from the bezels.
Squeeze a small amount of glue onto a piece of plastic. Dip a toothpick into the glue and smear the glue around the inside edges of the bezel. Insert a crystal chaton. If there is any excess glue that has squished out the sides, clean it up with a toothpick and rubbing alcohol.
Assembling the Bracelet
To attach the Organic Flat Tag, open the 9mm Textured Circle Jumpring using two pair of needle nose pliers. Hold one pair of pliers at 3 o’clock and the other at 9 o’clock. Pull one of the sets of pliers with one hand forward and the other set of pliers back to open the jumpring.
Insert onto the jumpring the Organic Flat Tag and attach it to the Toggle Ring. Hold the jumpring again at 3 o’clock and 9 o’clock with the pliers. Pull one of the sets of pliers with one hand forward and the other set of pliers back to close the jumpring.
Using two pair of needle nose pliers, hold the 6mm Textured Circle Jumpring at 3 o’clock and 9 o’clock. Pull one of the sets of pliers with one hand forward and the other set of pliers back to open the jumpring.
Add the Crystal Charm onto the jumpring and then attach jumpring to the Toggle Ring. Hold the jumpring again at 3 o’clock and 9 o’clock. Pull one set of pliers forward with one hand and the other set of pliers back to close the jumpring.
There you have it! How easy was that!
Watch Full Tutorial Video!
Watch the video to see how easy this kit is to create!
Print a copy of the instructions to follow along!
Shop Supplies WHOLESALE:
If you enjoyed reading this post,
please subscribe to our blog.
Here are 10 Reasons Why to Subscribe
and a place to do so!
If you enjoyed reading this post, please subscribe to our blog. Here are 10 Reasons Why to Subscribe and a place to do so!